The Aeotec Heavy Duty Switch Gen5 is based on Aeotec's smart switch technology. Just like all Aeotec smart switches, this one can be automated, manually controlled and remotely monitored. It is also equipped with the reliable and accurate Aeotec technology for monitoring power consumption.
Wireless control.
You have control over everything it is wired to. The Heavy Duty Smart Switch can be controlled via Z-Wave remote controls, apps and gateways if necessary.
Controlling automation.
Electronics do not always have to be switched on, but only when they are needed. The Heavy Duty Smart Switch allows you to automate and schedule the operation of connected heavy-duty devices.
Cost control.
High-power electronic devices tend to be the ones that cost the most money to operate. The Heavy Duty Smart Switch can calculate and report your output in watts and kilowatt hours in real time.
Control in an emergency.
In the event of an emergency, Z-Wave can be used to turn off the connected device. This way you can prevent further damage to electronics and your home.
Indoor switch and outdoor switch.
The Z-Wave Smart Switch can be used both indoors and outdoors. The Heavy Duty Smart Switch was not only made water-resistant for outdoor use. It has also been equipped with all the technology necessary for flawless outdoor operation: a long-range antenna capable of communicating over 150 meters outdoors and a Z-Wave repeater so that it can also do so other Z-Wave devices installed outdoors.
Technical Specifications
- Energy Measurement function
- Waterproof Rating: IP44
- Z-Wave Gen5
- Repeater: Yes
- Beaming: Yes
- Power Consumption: 1W
- Ratings:
- 240VAC, 50/60Hz;
- Maximum 9600 Watts 40A Resistor;
- 240VAC 5HP AC Motor;
1 phase only (Split phase - US)
- 120VAC, 50/60Hz;
- Maximum 4800 Watts 40A Resistor;
- 120VAC 5HP AC Motor;
1 phase (EU/AU)
- 240VAC, 50/60Hz;
- Maximum 9600 Watts 40A Resistor;
- 240VAC 5HP AC Motor;
- Minimum energy sensor reading: 2W
- RF range: 500ft/150m outdoor;
- Endurance of 10ms period peak current of 1440
- Environmental Conditions: Indoor and outdoor use;
- Altitude up to 2000m;
- Operational temperature: 5°C to 40°C;
- Max. relative humidity: 80%;
- Pollution degree 2.
- Product Size/Dimensions: 5.9 x 4.7 x 1.6 inches; 150 x 119 x 41 mm
More information
Aeotec maintains Heavy Duty Smart Switch Gen5 user guide and setup information at that link.
More technical specifications can be found in Aeotec Heavy Duty Smart Switch Tech Specs
Gateway compatibility please check aeotec.com/z-wave-gateways here.
The Aeotec Heavy Duty Switch Gen5 is based on Aeotec's smart switch technology. Just like all Aeotec smart switches, this one can be automated, manually controlled and remotely monitored. It is also equipped with the reliable and accurate Aeotec technology for monitoring power consumption.
Wireless control.
You have control over everything it is wired to. The Heavy Duty Smart Switch can be controlled via Z-Wave remote controls, apps and gateways if necessary.
Controlling automation.
Electronics do not always have to be switched on, but only when they are needed. The Heavy Duty Smart Switch allows you to automate and schedule the operation of connected heavy-duty devices.
Cost control.
High-power electronic devices tend to be the ones that cost the most money to operate. The Heavy Duty Smart Switch can calculate and report your output in watts and kilowatt hours in real time.
Control in an emergency.
In the event of an emergency, Z-Wave can be used to turn off the connected device. This way you can prevent further damage to electronics and your home.
Indoor switch and outdoor switch.
The Z-Wave Smart Switch can be used both indoors and outdoors. The Heavy Duty Smart Switch was not only made water-resistant for outdoor use. It has also been equipped with all the technology necessary for flawless outdoor operation: a long-range antenna capable of communicating over 150 meters outdoors and a Z-Wave repeater so that it can also do so other Z-Wave devices installed outdoors.
Technical Specifications
- Energy Measurement function
- Waterproof Rating: IP44
- Z-Wave Gen5
- Repeater: Yes
- Beaming: Yes
- Power Consumption: 1W
- Ratings:
- 240VAC, 50/60Hz;
- Maximum 9600 Watts 40A Resistor;
- 240VAC 5HP AC Motor;
1 phase only (Split phase - US)
- 120VAC, 50/60Hz;
- Maximum 4800 Watts 40A Resistor;
- 120VAC 5HP AC Motor;
1 phase (EU/AU)
- 240VAC, 50/60Hz;
- Maximum 9600 Watts 40A Resistor;
- 240VAC 5HP AC Motor;
- Minimum energy sensor reading: 2W
- RF range: 500ft/150m outdoor;
- Endurance of 10ms period peak current of 1440
- Environmental Conditions: Indoor and outdoor use;
- Altitude up to 2000m;
- Operational temperature: 5°C to 40°C;
- Max. relative humidity: 80%;
- Pollution degree 2.
- Product Size/Dimensions: 5.9 x 4.7 x 1.6 inches; 150 x 119 x 41 mm
More information
Aeotec maintains Heavy Duty Smart Switch Gen5 user guide and setup information at that link.
More technical specifications can be found in Aeotec Heavy Duty Smart Switch Tech Specs
Gateway compatibility please check aeotec.com/z-wave-gateways here.
Heavy Duty Outdoor Smart Switch Gen5
- Regular price
- $104.99
- Sale price
- $104.99
- Regular price
-